Tractor Talk Discussion Board |
Re: Don't want to start a diesel truck battle, but
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Shane on November 29, 2003 at 06:53:03 from (216.241.134.15):
In Reply to: Don't want to start a diesel truck battle, but.... posted by Tom on November 28, 2003 at 06:50:16:
I myself don't own a diesel but am a GM guy all the way. However, I do know for fact that the injection pumps on the 6.5L were kinda weak, if you have one go out have a good diesel shop rebuild it. And I also know for fact that someone had the great idea to save weight on the engines by shaving some of the block off behind one of the cylinders- hence a good place for a crack. Not sure what years that happened or when they finally decided it was a bad idea. Our seed dealer has an '01 Ford and pulls about 18,000 loaded and gets about 16 mpg and 18 mpg empty. He had a few Dodges but couldn't keep a tranny but they did about the same on fuel. Have a good friend who has Belgians and will get 18 mpg loaded with around 16,000 and over 20 mpg empty and has a Duramax/Allison. Another friend has a new 6.0L Ford and gets 16 mpg empty, but it seems to just shut down every now and then for no reason??? As far as the Allisons breaking that sounds strange to me, Allison builds trannys for the big trucks and I know they know what they are doing, curious as to what happened.
Follow Ups:
Home
| Forums
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|