Tractor Talk Discussion Board |
Re: Anti-Seize Tricks...
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Fred OH on December 12, 2003 at 08:51:51 from (38.119.141.143):
In Reply to: Anti-Seize Tricks... posted by fmr on December 11, 2003 at 11:12:50:
Generally speaking...if a nut feels like it won't come off with a reasonable amount of force...I take the torch and heat one flat on the nut to a dull to cherry red, slap a box end or an impact socket on it with a breaker bar, give it a turn (movement,usually back and forth) and take the wrench/socket off quickly in respect for the heat treatment in the wrench. Then let it cool for a few minutes and screw it off. While it's still hot I put a little penetrant on it...if available. Sometimes when you're out in the boondocks and none of these methods are handy...the guy that said to smack the flats on the nut with a hammer (at least three of 'em) gets an "A". Fred OH
Follow Ups:
Home
| Forums
Today's Featured Article -
Usin Your Implements: Plow and Disc - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|