Tractor Talk Discussion Board |
Re: Kubota vs. John Deere vs. Yanmar - Which to Bu
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by henrich-Iowa on December 29, 2003 at 13:31:07 from (209.37.234.254):
In Reply to: Kubota vs. John Deere vs. Yanmar - Which to Buy? posted by Karl on December 29, 2003 at 08:42:05:
Some things to keep in mind when purchasing a compact. How much PTO horsepower do you want to manage the implements you want to use? Go and look at all of the models, sit on them, drive them, and whatever else the dealer will let you do. You will find that the New Holland has the best visibility, which is very important when using a loader. Access for the hydraulic's is very important, as to where the main valves are located. Most of the tractors have them hidden under the seat or the platform and are not accessible to work with yourself. Make sure the tractor is equipped with all of the hydraulic outlets you can get. Make sure that your power steering pump is seperate from the other hydraulics on the tractor. John Deere always quoted that they have more hydraulic power but when it come down to it their power steering is feed by the whole hydraulic system so when the system pulls down you loose power steering. If you are purchasing it for landscaping, make sure it has either turf or industrial tires, not bar tires. The bar tires tear up lawns to much. Make sure the loader has a joy stick for the hydraulic movement so you can feather your movements. Also make sure you get a tractor with hydrostatic transmission, in the New Holland model it should come with a rear and mid mount PTO. Ask about specials, every month the various dealers have something different to offer you to compete against the other dealers.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|