Tractor Talk Discussion Board |
Re: GAS MILEAGE vs Diesel Mileage
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Greywolf on January 14, 2004 at 05:15:19 from (209.23.142.22):
In Reply to: GAS MILEAGE vs Diesel Mileage posted by DENNIS on January 13, 2004 at 15:06:08:
Can't speak for today with the computer controlled engines. Technology has improved a lot. In 74 I bought a new Nova 0 miles. Right out of the crate, mileage was around 12. 350 4V automatic with 3.07 gears. Changed the exhaust to headers with duals milage went to a strong 14. Changed out the cam and intake for better breathing, milage went to 17-18. After tweaking the carb (spread bore Rochester quadrajet), balancing and blueprinting the distributer (point and condensor shoved the timing from 4 BTC to around 16 initial around 32 total) and air filter, changing rear tires to 15 from 14 inch. Mileage leveled out at about 20-21 keeping my foot out of it. Put your foot into you just hung on for the fun ride on the way to the tire shop!!!!!!!!!!!! Pay off for all of the above in addition to intial cost (about $500 or so, i did all my own labor) was tune ups were done every 3500 miles. That's all the plugs could handle. Today's engines have to "go" a certain milage without tuneups and have been "de tuned" to achieve that. The very first place to start with any engine is to get it to breath better. On BOTH ends. Today's diesels already run the turbo for most of them so the input is somewhat taken care of, but for gassers fresh air intake improvements and exhaust will give you the best bang for your buck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|