Re: Pull the Plug or Leave it?

Posted by Lil-Farmer on February 07, 2004 at 20:08:50 from (208.194.0.190):

In Reply to: Pull the Plug or Leave it? posted by Dan on February 06, 2004 at 12:09:26:

It must be a 1/2" or bigger pipe thread to have a 3/8" square drive in it. I would try drilling it with a 37/64 bit in an air motor drill and then tapping to 3/8 pipe thread.

If you are concerned about heat and fumes, use a hose from another vehicle exhaust to fill the tank with non explosive fumes.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Pull the Plug or Leave it? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]