Re: Re: Water in Hydraulic System

Posted by Mike A on February 24, 2004 at 17:09:43 from (204.248.119.254):

In Reply to: Re: Water in Hydraulic System posted by Mike on February 24, 2004 at 12:15:44:

this article caught my eye because I just got done doing this on my 560. You have to change the oil, and flush the system. I just use some good used oil to flush it. Also, before you drain it add 5 gal. of diesel and drive it down the road. this will mix in and help get it all out. Drain all hoses, lines, covers, etc. that you can (I have a fast hitch, for example) During flush run everything you can, like steering back and forth, and running the remotes. (hook up implements or use a jumper hose) then drain again and fill with new oil. Change the filter each time too. it will be worth your time and money in the long run.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Water in Hydraulic System Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]