|
Tractor Talk Discussion Board |
FORD 801 LIFT ARM SUPPORT
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by DAVID on March 03, 2004 at 16:33:18 from (216.12.192.71):
HELLO,
ANY ADVISE ON REPAIRING THE LOWER LIFT ARM SUPPORT PIN? ONE OF THE PINS ON MY TRACTOR HAS WORN AND COME LOOSE ALLOWING DIFF OIL TO LEAK OUTOF IT. I HAVE FOUND A REPLACEMENT PART BUT THE SHOP MANUAL DOES NOT EXPLAIN REPLACEMENT. IT LOOKS LIKE I HAVE TO REMOVE THE AXLE HOUSING. CAN YOU JUST REMOVE THE NUTS AND PULL THE WHEEL AXLE AND ALL? THANKS
DAVID
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
