Tractor Talk Discussion Board |
Re: Ferguson hyd. in-op after a draft spring adju
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Crem on March 05, 2004 at 22:08:20 from (169.207.105.117):
In Reply to: Ferguson hyd. in-op after a draft spring adjustme posted by Rick Hawk on March 05, 2004 at 06:02:34:
I don't know which Ferguson that you are referring to, but if it is a TO-20 or 30 I can tell what happened to mine when I tried to adjust the draft spring. The adjusting threads were rusted so that it would not turn. I tried to force it and I snapped off a small stem on the control valve at the bottom of the pump. The fork assembly moved too far because of my twisting effort and snapped the stem which is about 1/16" in diameter. If this is the problem, you have to remove the pump. Possibly it could be welded. I had an extra pump that I installed.
Follow Ups:
Home
| Forums
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|