Re: BCS tiller tines installed wrong???

Posted by evetS on April 04, 2004 at 09:54:12 from (64.233.114.62):

In Reply to: BCS tiller tines installed wrong??? posted by Donnie on April 02, 2004 at 07:23:00:

Hey Donnie,

About 2 weeks ago I replaced the knifes/blades on my Befco 5' tiller. The old ones were wore down to the "nubs". I replaced 1 at a time, took it out for a trial run w/some bounceing. Well I needed to adjust the skids on the side that sets the depth of cut. Just a thought (after you rule out improper installation)if you havent. I'm sure you'll nail it down shortly. Good luck.

Steve

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: BCS tiller tines installed wrong??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]