Tractor Talk Discussion Board |
Re: Re: using epoxy to attach new brake linings
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ShepFL on June 09, 2004 at 06:34:05 from (155.14.118.90):
In Reply to: Re: using epoxy to attach new brake linings posted by Wayne on June 08, 2004 at 20:18:51:

Got this lead from the AC site. Got one of these when rebuilding brakes on my AC G and D10. With this and the lead Wayne provided for rivets you should be back in business. Compliments of from Eric Egland 130383 "Tractor brake rivet tool This is a tool my flying buddy let me use to do my G brakes. The old rivets are punched out with the removal attachment and new rivets are set using the back-up insert at the left. The screw has the forming detail on the end. It does an exceptional job. I've done three sets of G brakes so far and they all look factory( or better ). The right way to do it. G,B,C+++ Nice tool for doing brake linings. Chief Aircraft, 800-447-3408. Part# RA BRT $24.95" HTH
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|