Re: Re: 2010 john deere tractor 4 cylinder diesel

Posted by Tommy D6-8U on July 02, 2004 at 02:48:58 from (209.198.54.244):

In Reply to: Re: 2010 john deere tractor 4 cylinder diesel engi posted by RAB on July 01, 2004 at 23:38:25:

RAB,

On in-line 4 and 6 cylinder engines, I put a cylinder at TDC on the exhaust stroke by watching the valves for when they "rock"; one closing and the other opening. Then I set the companion cylinder because I know then its on TDC on the compression stroke. They will be paired 1-4 and 2-3 on 4 cyls and 1-6, 2-5, 3-4 on 6 cyls. You still need to know valve clearances and which valve is which but you don't need to know firing order or direction of rotation. Someone on the JD board probably knows the settings. Hope this helps. Most 4 cyls will be 1-3-4-2 and all 6 cyls I know of fire 1-5-3-6-2-4.

Tommy

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: 2010 john deere tractor 4 cylinder diesel Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]