Tractor Talk Discussion Board |
Re: Re: Deutz 06 hydraulic
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Marc on July 18, 2004 at 17:43:26 from (65.132.44.172):
In Reply to: Re: Deutz 06 hydraulic posted by Alvin n Ms. on November 07, 2003 at 11:02:05:
The information you have received about the filter location is correct. There is a triangular-shaped cap on a casting that sticks up from the three-point unit in front of the seat. There will either be a "tall" or "short" filter under the cap. Actually, the short cap is circular in shape. There is also a screen style filter in the housing itself usually under a plastic cover with a spring-type clip over the end. As far as the three-point arms letting down, about half of the tractors did this when they were new. If you're sitting on the tractor, down on the front of the lift unit above where the small hyd. line comes out and crosses over the trans., there is a circular piece with an Allen's head screw and a couple of plugs. This is actually a cylindrical unit about 6 inches long. Called the "brain" it controls the metering of the hydraulics, from the three-point to the remotes. Take out the Allen's bolt, and then you will have to take off the remote valve or valves. There will also be an Allen's bolt the same size as the one in the front of the unit. After these have been removed, try to turn the "brain" 90 degrees counter-clockwise. After you do this, try to pull the brain out. If you can't, drive it out from the back. You will have to take the cover off of the three-point unit. After you get it out, check the condition of the O-ring on the side. Also, there is a slotted plug on the side. Remove this and check for a "mushroom" shaped piece behind it. If this is broken, or the O-ring is damaged, your hydraulics will "hiccup" with the engine running and something heavy on the lift-arms. Even when all of this stuff is okay, the lift-arms may still leak down when the engine is shut off. I got all of this info. from a certified Deutz tech..
Follow Ups:
Home
| Forums
Today's Featured Article -
Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|