Tractor Talk Discussion Board |
Recommendation for Splitting Wood By Hand
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tim B. on August 30, 2004 at 20:13:09 from (216.195.2.162):
This is a follow-up of sorts to a thread that went through here a few days ago re: splitting wood by hand. I sold firewood through college and grad school, and I have guessimated that I have split about 500 cords by hand. It occurred to me a few years ago that when you have good or decent splitting wood the most work, and worst on your back is bending over to pick up the pieces that go asunder after most splits. Now I stand several pieces in a circle (3 or 4 in the center, surrounded by 5 - 8 depending on size) and binding them together with a length of rope wrapped around the "stand" and tied with a cinch knot. As you split the wood pieces stay up on end, no bending over, no time waste and you go through those pieces in no time. When splitting interior pieces you need to lift up sharply on the maul handle just as the maul makes the split to avoid breaking the handle, but it is easy with a little practice. This is a great way to make kindling too. It is satifying to whack away at a few pieces of wood for 5 - 10 minutes and have half of the kindling you need for the year. As far as my tool of choice, I only like a 7 pound maul. I have tried 6 and 8 pounders, and those giant wedge "bombs" but they are just a bit too light, a bit too heavy, and way too heavy respectivly. I also like Oregon brand or equivalent. This is just a simple "maul shape" and a wood handle. Don't go for the cross between and axe and a maul where the wedge side has a few inches of a straight blade shape before expanding into the wedge. This just gets stuck in the wood. I now have a nice haudraulic splitter with a 2 stage pump, but I sometimes still split by hand. When you have good splitting wood, the method I described above is faster and I enjoy it more.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|