Re: OT Question concerning charging problem on tru

Posted by Jon H on September 03, 2004 at 21:08:20 from (69.26.17.14):

In Reply to: Re: OT Question concerning charging problem on tru posted by Kendall on September 03, 2004 at 09:18:19:

Kendall, You can check for thr rotors magnetic field by holding a steel tool to the end of the rear alternator bearing. This does the same job and eliminates the danger of messing with moving pulley/shaft and fan belt. This only tells you that the rotor is getting power,so regulator,brushes and rotor are working.If the stator or rectifier is bad,the alternator will not charge even if the rotor is powered,but it still is some indication that the alternator should be working.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]