Tractor Talk Discussion Board |
Re: Idiot drivers!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Redman on September 19, 2004 at 17:19:02 from (66.44.173.27):
In Reply to: Re: Idiot drivers! posted by Paul in Mich on September 19, 2004 at 10:14:47:
just a guess here,but i would guess neither of you have been behind the wheel on a 18 wheeler,do i get a prize? since the 2 of you have a good bead on the laws and how they work,let me explain it to both of you. 1.fact,it is the person mergings duty to do it as smooth as possible,but if i pull out with a big rig and get it strait before you hit me it is your fault. 2.be most important rule on the road should be common sense,this means if you are going along in your car or truck and you weigh all of 6000 pounds you really should show the trucker that you are boss over is small 80000 pounds. 3.that trucker has more times than not drove threw more than one city that day,and everyone thinks they are the most important on the road. i have only logged 1,250,000 miles on the road,but i would guess you could do it better.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|