Re: Massey 35 trans

Posted by Big Dean on October 10, 2004 at 14:52:47 from (64.12.117.10):

In Reply to: Massey 35 trans posted by David Pearsall on October 10, 2004 at 08:25:25:

Find a level spot shut off the tractor. Push the clutch down & put the high low shifter in neutral to relieve any pressure that might be on the gears. Pull your filler plug for the transmission look inside you will see a big gear for first & reverse and the shift fork for second & third. With a long screwdriver or a small pry bar. If it is hung in first or reverse pry the big gear forward if it is hung in reverse Pry it back if it is hung in first gear. If it is hung in second or third. Pry the second and third shift fork forward if it is hung in second.If it is hung third pry the shift fork toward rear. If you happen to go to far it will go in the other gear. You need to get it in the center. You should be able to feel the detent balls pop in the grooves in the shift rail as you move the gear. Through the years I have probably unstuck at least a 1000 of them this way. It is a common problem on the Massey tractors after they get a little wear on them

Follow Ups:

• Re: Massey 35 trans David Pearsall 20:09:30 10/17/04 (0)
• Re: Massey 35 trans David Pearsall 17:47:46 10/10/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]