Re: how can I et my 4430 to start better under 50

Posted by John A. on October 12, 2004 at 20:38:35 from (65.161.172.162):

In Reply to: how can I et my 4430 to start better under 50 degr posted by Johnsdeere on October 12, 2004 at 19:56:52:

Johnsdeere, I would be willing to say that your 4430 probably has in excess of 8000 hrs on it, You didn't say if it had been O/H anytime. So here goes.......The injectors sounds like they are getting real sloppy. Instead of atomizing the fuel into the cylinder (very fine mist). It is kinda just spitting it in there. Hence the hard starting under 50 degrees. Check with a good local DSL shop and check on a set of rebuilt injectors, or getting yous redone. Pump could need some attention too.
Later,
John A.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]