|
Tractor Talk Discussion Board |
Allan! Tractor prices....
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Indydirtfarmer on October 14, 2004 at 04:25:40 from (66.83.236.250):
Mornin'! It's a rainy, cool fall morning here. Got nothing better to do than look up prices on RED tractors. (I need to get a life....) OK, I found listings on several 966's. 1.) 8000 hours, T/A not working, smokes, 25% rubber. Open station. Needs paint. $3900 2.) 5400 hours, new paint, new clutch, T/A good, NEW 18.4/38 radials. Cab w/h-ac. Overhauled 200 hrs ago. new injectors 25 hours ago. $10.500 3.) 7700 hours, Older re-paint. T/A good, Underhaul at 6000 hrs. 80% rubber. Cab w/h (ac doesn't work) Full front weights/3 pair rear weights. $7,950 4.) 3900 hours, original paint (looks new) Good T/A, 80% 20.8/38 duals (Axle mount) Full weights, cab w/ h-ac. One owner, well cared for. Full service records from original dealer. All manuals included. $10,900 5.) 8000 hrs. Rough. T/A not working. Low hydraulic pressure. 75% rubber. 18.4/38 rim-mount duals. Engine replaced (NEW) at 3400 hrs. $4,750 I've found several others, but these would indicate "typical" mid-west pricing, I would think. John
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
