|
Tractor Talk Discussion Board |
Re: Re: Re: Freeing a Stuck Engine question
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by MikeH(Tx) on April 22, 1999 at 10:27:26:
In Reply to: Re: Re: Freeing a Stuck Engine question posted by Rick K on April 22, 1999 at 10:13:48:
My opinion is that Marvel is way too thick to do this job. Your friend should be using Kroil or one of the other penetrating oils, even WD40 or one I like called MicroMist. Worst case, mix the
Marvel with kerosene to thin it up. Marvel is best as a lubricator when the engine is running, either in the gas (careful of fouled plugs) or in the oil, or both. In the YT archives is an article dealing with all the suggestions for unsticking tractor engines. Some good ideas there.
Follow Ups:
Post a Followup
|
