Re: does an economical brush chipper exist?

Posted by James2 on November 05, 2004 at 10:19:32 from (12.2.142.7):

In Reply to: does an economical brush chipper exist? posted by Butch(OH) on November 05, 2004 at 06:20:59:

The short answer is "no". We have a Bear Cat chipper made by Crary Manufacturing which costs around $2500. It will handle up to 4-5 inch branches but you would have to be a relative of Paul Bunyan to make it happen. In reality, anything greater than about 2.5 inches if done very often would require a self feeder, and this gets very expensive. We have run 2 to 2.5 inch hedge thru it but it really takes two handlers to force feed it. One to 1.5 inch hedge is more like the max.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]