Re: Allis-Chalmers B

Posted by lucass on December 31, 2004 at 17:19:59 from (209.240.205.61):

In Reply to: Allis-Chalmers B posted by Mike10 on December 31, 2004 at 13:57:18:

if your crank is std .you cant put 010 bearings in untill you have the crank reground to .010 .if you have the allis engine you can get .002 under rod bearings though you may use if worn about .002.if you have the b with the hercules engine you will have to have it reground to fit brgs.hercules used a main set with the flange brg on the rear main and a main set with thrust washer on # 4 or #7 main..the nice thing about the brgs set with thrust washers is you can get the washers oversize....lucass

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]