Tire Chain question for Allen and the group

Posted by Bob4knee on January 09, 2005 at 19:41:03 from (204.221.26.55):

Hi

I gave up on getting the auction chains to fit the Farmall M. They weren't quite wide enough to make me comfortable. I ordered a new $et from tirechains.com, and put them on today (It's 25 F today, figured I'd get them on before it gets cold).

I'm not real happy with how tight I'm getting them, but I've used up all the extra chain (any tighter I'll be hooking inside the first cross chain). The tires are 15.5-38s, I'm guessing that they don't make a different size for every tire, and mine is at the small side of the range?

If I hook them outside the first cross chain, I can make them tight enough that they won't fall off (by stretching pulling the slop to the outside with chain stretchers and tarp straps). Then they sound and feel looser than I'd expect (but I know nothing about tractor chains, on a car/truck they'd be way too loose). I can pull out on the side chain and get my whole hand inside (between side and tire) anywhere I try--isn't that too loose? They sound much looser than car chains, but I'm closer to them and I guess (do to tread design) they need to be a little looser to work right. Am I way off base?

If I were to hook inside of the cross chain (these are the duo-grip, with a square on the tread and 4 corner chains going to the side chains--thissquare is also to the outside, but still on the tread as installed now), I guess I could just start to wrap them around again and hook the extra, but I expected with "custom" chains to not have to do this.

Also, what's the best way to put them on? I run over the end of the chain, the throw the rest over the tire and hook it. Easy on a car/truck, lots of chain to hunch over with a tractor. Throw it up, pin it to the tire with my chest, grab another handful and throw it higher. On a warm day with brand new chains, no problem. With the old chains on a cold day I'd get covered with rust and colder. Is this the best way? No big deal really, it's not that hard and I only figure to do it once a year, but if there's a better (and/or easier) way I'd be glad to hear it.

Are there other options to lapping the cross-chain over? Like use a couple of temporary links to shorten the side chain between 2-3 of the cross links around the tire (same place on both sides)? any other wisdom?

I like the way these fit much better than the auction chains. I already put time and money into making the auction chains long enough before I chickened out on the width. They were barely as wide as the tread, so (If I cut all of the tarp straps) I could probably work them off of the tire w/out unlatching the side chains. I figured with no fenders I didn't want them flying off.

Follow Ups:

• Re: Tire Chain question for Allen and the group Ultradog MN 17:46:45 01/10/05 (0)
• Re: Tire Chain question for Allen and the group WiCraig 15:44:02 01/10/05 (0)
• Re: Tire Chain question for Allen and the group RWK in WI 07:18:26 01/10/05 (1)
  • Re: Tire Chain question for Allen and the group Bob4knee 20:04:31 01/10/05 (0)
• Re: Tire Chain question for Allen and the group Lyle 04:38:12 01/10/05 (0)
• Re: Tire Chain question for Allen and the group Allan in NE 03:37:12 01/10/05 (0)
• Re: Tire Chain question for Allen and the group paul 22:44:16 01/09/05 (0)
• Re: Tire Chain question for Allen and the group Dug 21:03:36 01/09/05 (0)
• Re: Tire Chain question for Allen and the group Butcher 20:42:37 01/09/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]