Tractor Talk Discussion Board |
Re: Thanks for all the good advice
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by LK on January 11, 2005 at 07:26:30 from (64.236.208.25):
In Reply to: Thanks for all the good advice posted by ETD66SS on January 11, 2005 at 05:54:04:
I felt a need for a backhoe a few years back. Through an ad in a local advertiser mag, I found a fellow that had a couple Case 580B machines. I ended up buying 2 machines in nice restored/rebuilt/repainted condition for $20k. The idea was that my brother was going to buy one of them- I ended up selling his instead. These are 2wd machines and are very heavy. For my needs, they are fine but I think they are heavier and not as strong as the newer backhoes. The one that I sold had the extendahoe and the 4-in1 bucket. These features are nice, but added around a ton to the weight. The result was that the machine was pretty bad in the mud. I once got it stuck at a neighbors, and couldn't pull myself out. It just didn't have the strength. I had to bring the 2nd machine over to yank it out! The 580B that I am keeping has the simple bucket and the regular hoe- still it weighs 13k lbs. However, it is a bit more nimble and more able to get itself out of trouble. I have heard that starting with the 580C series, the machine was designed as a backhoe from the ground up. On the 580B's, they started with a tractor and added to it to make a backhoe. Still, they are very capable machines, and I wouldn't be without one at this point! The point of all this rambling is that you can buy a credible backhoe for $10k- I did. However, to get a 4wd backhoe, I think you will likely be more like 15k. And I like having the capability of a full-size machine. Try contacting a heavy equipment contractor. I heard of one locally that sells his machines once they get 5000 hrs on them.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|