Re: How to cut syrafoam

Posted by Van in AR on January 17, 2005 at 06:38:21 from (216.134.231.237):

In Reply to: How to cut syrafoam posted by old on January 17, 2005 at 06:27:46:

Old,
you can cut it with a old electric carving knife. To cut it down the length to make thinner sheets we have used a wire stretched between two blocks at the desired height and heated the wire with a welder, just turn up until it feeds through, may take som trial and error. Made a plywood base with two angle irons on each side and slide foam through wire, keep seperate on output end as its hot and sticky for a minute, wear gloves.
Van

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]