Tractor Talk Discussion Board |
Re: tire fluid method
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Klm on January 18, 2005 at 18:43:34 from (65.42.120.200):
In Reply to: tire fluid method posted by old on January 18, 2005 at 09:54:48:
Wow that is an old picture. Okay I believe I know what it is they are doing. It has been a while but, used to be involved with filling tires on tractors. They used to have a part that would thead onto a garden hose and then it would thread onto a valve stem. (The schrader valve would have to be removed) The method in the picture uses gravity to flow down to fill the tire. When you want to empty the tire you would put remove the schrader valve and then put roll the tire to place the vavle stem at the bottom. Now the wieght of the tire will push the fluid out. Not sure if you can get the adapter for a garden hose anymore. I'll admit we used pumps to pump the fluid in and out of tires as needed. Contact your local Farm tire dealer if you want the adapter.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|