Re: 3 pt Cultivators

Posted by Upon further review..... on January 21, 2005 at 17:02:19 from (204.255.239.177):

In Reply to: Re: 3 pt Cultivators posted by BillKY on January 21, 2005 at 16:53:16:

Me again! (BillKY) After re-reading your original post, I think you might get away with a 5'er, provided you don't try to go too deep. With it set at around 4" to 5"s, you should be able to power that tiller. Just be patient, and don't try to knock it all out in a few minutes. If you run into a "lack of power problem" just don't run it so deep. Also, you can overlap your passes somewhat to lessen the load on your tractor.

Again...GOOD LUCK!

Follow Ups:

Post a Followup Name: E-Mail: Subject: 65534p> Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]