Re: CASE 830 HYDRAULIC FILTER

Posted by Roger H on January 22, 2005 at 10:32:07 from (216.248.104.132):

In Reply to: CASE 830 HYDRAULIC FILTER posted by KGWATKINS on January 22, 2005 at 09:51:02:

If your 830 is a Comfort King, the filter is a spin on type that is under the operators platform on the left side, the filter sticks straight out toward the rear tire. If it is not a Comfort King, look on the rear below the pto shaft, you are looking for a triangle shaped plate with 3 bolts in it. If it on the rear of the tractor, get ready to catch the oil in a pan when you loosen the bolts, don't take the bolts all the way out until the oil slows down or stops running out, this filter is what Case called an edge wound filter that can be cleaned & re-used. Good Luck..Roger

Follow Ups:

• Re: CASE 830 HYDRAULIC FILTER KGWATKINS 05:21:11 01/23/05 (1)
  • Re: CASE 830 HYDRAULIC FILTER Roger H 06:55:52 01/23/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]