Re: 350 Chevy Motor

Posted by Moline on January 29, 2005 at 18:23:45 from (206.221.224.21):

In Reply to: 350 Chevy Motor posted by 37 chief on January 29, 2005 at 18:16:46:

In my humble opinion,for a stock application,a 2 bolt main is fine.If you are building a hot rod or pulling heavy loads,the 4bolt is stronger.There are a lot of hot rodders running 2 bolt main blocks at 1 HP per cubic inch and not having any problems.GM themselves built some pretty hot engines with the 2 bolt block.The small block Chevy is a good tough engine and the 2 bolters are just fine.JMHO,Moline

Follow Ups:

• Re: 350 Chevy Motor Eric Rylander 06:00:30 01/30/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]