Tractor Talk Discussion Board |
Re: Any Better Luck Here?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Indydirtfarmer on February 25, 2005 at 03:37:40 from (66.83.236.250):
In Reply to: Re: Any Better Luck Here? posted by billonthefarm on February 24, 2005 at 18:21:13:
There is NO direct link between the 4630 and the 4640. The 4630 was SIMULAR, but not the same as the 4620, but when the 40 series was introduced, the 4640/4840 were wide-framed tractors, designed new from the ground up. They both sported the 466 turbo/intercooled engines. They are still much sought after for "field tractors". The 4630 wasn't a stump puller, even with it's 150 HP, because of the 404's relatively limited low end grunt. The 4640 was an "Iron Horse" of another color. Introduced as "The Iron Horses", the 40 series brought a completely new chassis, engine, and SIZE/weight to the table. The chassis saw developement from the 40, 50, 55, and through the 60 series. (I have a 4955...It is a "hoss") No one that's ever seriously used one of the wide-framed Deere's will knock their performance. All in all, as good, if not the BEST big tractors EVER built.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|