Tractor Talk Discussion Board |
Re: What is a 1,000 rpm PTO for?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jon H on February 25, 2005 at 17:14:03 from (69.26.17.62):
In Reply to: Re: What is a 1,000 rpm PTO for? posted by WeirdDeere on February 25, 2005 at 00:10:34:
That reminds me of an experience I had at the Oliver dealer many years ago. Olivers like the 1950 could be fitted with not only the 540 and 1000 pto,but also an engine speed pto. I thought the engine speed pto would be ideal to run a standby generator that formerly had an engine to drive it. I headed to the parts counter and indicated to the partsman what I wanted. He gave me a bit of a crossways look and demanded to know why I wanted that setup. I explaned that it would be ideal th run this 1800 rpm generator at less than the tractors 2400 rpm engine speed which should be easier on the tractor at that light load. The partsman relaxed and explaned that another guy had bought the engine speed pto kit thinking this was what he needed for a 1000 rpm pto on his new forage chopper. Almost 2-1/2 times 1000 rpm and rotating backwards did nasty stuff to his new chopper :)
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|