Re: Removin' blade from bush hog

Posted by john in la on February 25, 2005 at 19:14:42 from (65.6.127.7):

In Reply to: Removin' blade from bush hog posted by Bill Caldwll on February 25, 2005 at 18:51:24:

Laying in the water; I mean mud may be unavoidable.

The blade is held on with a bolt and nut. You will have to get under there to hold the bolt from turning while you get the nut off.

I find it is a lot easier to take it off with a torch and replace with new bolt and nut.

Have fun in the mud. After yesterdays rain we are now up to 12 1/2" so far this year here in the south east corner of the state.
Spring is on the way though.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]