Tractor Talk Discussion Board |
Re: Diesel Damage to gas engine - valves??
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Doyle Alley on April 07, 2005 at 08:02:05 from (12.96.60.2):
In Reply to: Re: Diesel Damage to gas engine - valves?? posted by Joe (Wa) on April 06, 2005 at 22:37:12:
Go to your local auto parts store (Napa carries it) and look for a product called Sea Foam. This will become your best friend. When used as a preventative, it works as good as Stabil for preserving stored gas. It also keeps carbon from building up on your valves, pistons, rings, and plugs. And, it cleans carbs and injectors. When used as a shock treatment, it will burn off carbon and gunk like nothing else. It has become the treatment of choice for 2-stroke outboard owners down here (outboards have a nasty habit of carbon fouling on the rings). In your case, you'll need to use it as a shock treatment. The shock treatment rate is one can in 3/4 gallon of fuel (fuel/oil mix for 2-strokes). In your small application, I would't mix us a full 3/4 gallon. Just let the tank drain down (run the engine to get it good and hot) until there is only about a cup of fuel and then add about one fluid ounce of Sea Foam (keeping the 1 can to 3/4 gallon ratio). Crank up the motor and let run for a few minutes, then shut it down for 15 minutes. Then crank it up again for a few minutes and shut it down for 15 minutes. Do this until you've drained the tank. It will probably smoke like crazy the first two times you run it. That will be the carbon burning off. When there is no more carbon to burn off, the smoking will stop and your valves will be clean (as well as the other parts in the combustion chamber). By the way, it also works good in diesels.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|