|
Tractor Talk Discussion Board |
Re: Oil Pressure problem-John Deere
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim Ghormley on April 08, 2005 at 11:24:25 from (192.31.106.42):
In Reply to: Re: Oil Pressure problem-John Deere posted by Allan in NE on April 08, 2005 at 11:14:49:
I have already played with the oil pressure adjustment screw and removed it and blew this passage out. I have drained the oil and sprayed an entire can of carburetor cleaner down this hole and the gauge hole followed by compressed air till it came out the oil drain plug thinking some junk may be stuck in the oil pump line somewhere or in the screen. I rebuilt the engine myself and did not take out any oil plugs or even see any. The oil pressure goes up slightly with RPM but not near enough to where it should be. It still puzzles me why the oil pressure would be good for 5 minutes then slowly go down. When I first started the engine after rebuilding it, it had good oil pressure for 5 min. I have changed the oil 3 times.
Jim
Follow Ups:
Home
| Forums
Today's Featured Article -
Good As New - by Bill Goodwin. In the summer of 1995, my father, Russ Goodwin, and I acquired the 1945 Farmall B that my grandfather used as an overseer on a farm in Waynesboro, Georgia. After my grandfather’s death in 1955, J.P. Rollins, son of the landowner, used the tractor. In the winter 1985, while in his possession the engine block cracked and was unrepairable. He had told my father
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
