Tractor Talk Discussion Board |
Re: Gooseneck/5th Wheel
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on April 12, 2005 at 14:47:49 from (4.240.132.13):
In Reply to: Re: Gooseneck/5th Wheel posted by Steve (Magnolia, TX) on April 11, 2005 at 09:31:48:
Hi Glenn, A single action (tilts forward & backwards) 5th wheel has more side to side stability than a GN, not to say that a GN is not fine hitching. A two way action 5th tilts both forward/backward and side to side. Most of this type of 5th hitching has a side to side lockout pin so it can be made single action if desired. You do loose some side to side stability with multi-tilt 5th wheels, but not much. You have a typical 8" bolster plate (RV, not semi 30") on a 5th, on both kin pin and on the hitch head. So that means you sandwich a 2" pin between two flat plates. You can also get air ride 5th where you achive 6-way head action or 8-way head action with air springs for a softer pull. Any ridgid mount hitching will get a push from the trailer upon start-up and stopping. After driving 10hrs or so this gets old on your back so thats why the air bag 5th wheels as the air springs absorb the trailers "push". Where a GN out shined a 5th wheel is traveling or hitch up while on ruff terrian as it "was" much easier to hitch/unhitch plus the GN added more tilt movement being on a ball vs flat plates. Typical RV 5th hitching is rated upto about 34k maximum GCWR with 6k of vertical pin loading. Typical GN hitching is rated upto 30k GCWR with 4K pin weight. This lower pin weight is due to the lack of typical hitch mounting design. A coverter hitch, both 5th and GN on one sub-frame mount, has the same weight rating in both GCWR and pin weight. T_Bone
Follow Ups:
Home
| Forums
Today's Featured Article -
A Cautionary Tale - by Ian Minshull. In the early 1950s my father bought an Allis Chalmers B and I used it for all the row crop work with the mangolds and potatoes, rolling and the haymaking on our farm. The farm and the Allis were sold and I have spent a lifetime working on farms throughout the country. I promised myself that one day I would own an Allis. That time event
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|