Tractor Talk Discussion Board |
Re: Gooseneck/Fifth Wheel Questions also F350
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brokenwrench on April 14, 2005 at 06:04:12 from (69.128.196.197):
In Reply to: Gooseneck/Fifth Wheel Questions also F350 posted by Kirk Grau on April 14, 2005 at 03:52:56:
The fifth wheel ball on the truck your looking at is a heavier duty set-up than the plate style. We had the same thing happen with a camper we bought. Our truck already had a tip down fifth wheel ball in it, but the camper had the king pin style. Camper sales guy sold us an adapter (goose neck) to mount on the camper to make it compatible with the ball. It"s a little harder to back into but not bad. I don"t know what your plans are, but for most stuff, flatbed trailers and even bigger horse trailers will all have the gooseneck/ball setup. From what I see it seems to be more universal and it takes up way less box space. I"d check into getting an adapter for your trailer. Now, about the truck. We have a 95 F250 w/150000miles, a 99 F350 w/125000 miles, and a 2000 F350 w/135000 miles. We haven"t had any major problems with any of them. Maintenance on a diesel is big. Changing fuel and air filters regularly makes alot of difference on performance. If your buying it from a private party that has all the records, that would make me alot more comfortable than buying it on a lot and wondering what"s all been done. In our neck of the woods there"s alot of cattle haulers that have 300,000 plus miles on these Dodge and Ford 1 ton diesels, and soon you"ll start seeing the Duramax in that group too. That said, my disclaimer is, you can have problems with any vehicle. If you treat them right, more often than not they won"t let you down. Brokenwrench
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|