Re: replacing main bearing on ford 4000

Posted by Rod F. on April 16, 2005 at 18:22:22 from (142.177.98.120):

In Reply to: replacing main bearing on ford 4000 posted by fred5454 on April 16, 2005 at 03:24:31:

Much depends upon which 4000 you have. If you have a 4 cylinder from '62-64, then you should be able to follow MSM's advice. If you have a post '65, then the game is different. Then you must remove the axle trumpett, pull the brakes, then the planetary, and then remove the retainer bolt on the outer shaft, and then extract the shaft. Once you do that, then you can remove the seal and bearing if necessary. A leaking seal is not all that uncommon. That's the basics of it. HTH.

Rod

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]