|
Tractor Talk Discussion Board |
O/T truck not running
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ben Rauls on April 18, 2005 at 19:05:59 from (209.206.146.74):
Just rebuilt the 351w in my 84 1-ton SRW 4wd. Bored .030, crank turned .020 under, new pistons, rings all bearings, cam( stock) and lifters, had the had the valve seats reground, and new seals put in. It wont run. the factory intake gasket was a tin that covered the lifter valley, my gasket set came with just normal intake gaskets, i didnt put the tin part back in, just used the gaskets from my kit. I bring No. 1 tdc of compression, distribitor rotor, points to 1 on the cap, I crank it with spark plug out of number 1, and watch the spark testerhits compression and sparks, back fires through carb. I hope this was enough info for someone to help me. Thanks in advance for the help.
Ben Rauls
Follow Ups:
Home
| Forums
Today's Featured Article -
Good As New - by Bill Goodwin. In the summer of 1995, my father, Russ Goodwin, and I acquired the 1945 Farmall B that my grandfather used as an overseer on a farm in Waynesboro, Georgia. After my grandfather’s death in 1955, J.P. Rollins, son of the landowner, used the tractor. In the winter 1985, while in his possession the engine block cracked and was unrepairable. He had told my father
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
