Tractor Talk Discussion Board |
Re: Down to the details on pole barn for farm use
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bill in NorthCentral PA on April 29, 2005 at 05:47:20 from (209.50.143.180):
In Reply to: Down to the details on pole barn for farm use posted by Mark2 on April 28, 2005 at 07:53:10:
Mark2, I have built somewhere around $500,000 in post frame structures, and if the price is erected, it does not sound bad. The laminated poles are fine - not a problem assuming that they are fastened together well. Light Panels - any seam can leak. Having said this, I would install them in the roof - ONLY if they are polycarbonate - not fiberglass. These are available in the traditional white or a clear that is clear as glass - they are tough. I had a wind storm blow a loose panel up against a 6x6 and bent completely around it - no damage whatsoever. The company that started making them was called SunSky - great stuff - fasten per the manufacturer"s recommendations. 2x4 purlin spacing 30" on center, max and usual - but I often used 24" if my insulating material was a 2" on center product such as 4x8 rigid insulation. The foil bubble wrap works well for an anti-condensate material - if heating, I would apply a ceiling to the bottom chord of the trusses. The trusses need to be designed for this however. Any questions, please ask. Good Luck, Bill
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|