Tractor Talk Discussion Board |
Re: Elec. Tape Fencing???????
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on April 30, 2005 at 21:36:08 from (4.240.42.114):
In Reply to: Elec. Tape Fencing??????? posted by SJ on April 30, 2005 at 13:27:02:
Hi Stan, I've been researching electric fence for a couple years. I'm wanting to put in the longest lasting fence I can for the least amount of cost but the best fence at the same time. I'm in the Arizona desert so it's very dry ground. Only steel or concrete will last thru the summer heat for many years. I'm going with what they call a New Zealand style fence, top hot, second ground, thrid hot, at 5ft high top 12.5ga wire, wire spaced every 14". 6" round Concrete corner and center posts (brown concrete coloring) with 1/4" nylon tube inside the concrete for insulator tie off point. I making metal forms out of 6" round duct with flatbar for the seam joints. T-post spaced 20ft or so for intermediate posts with standard UV rated offsets. Spring loaded ratchet tighteners on the center posts. There's been a few threads on this forum and the tool forum over the years for a good read. You might want to search the archives at the top of each forum. T_Bone
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|