'52 Moline

Posted by Dan Mitchell, Tupelo, Ms on May 08, 2005 at 19:07:43 from (208.148.199.93):

Hi fellows,
I recently got my Moline running but have experienced a set back. It seems the bolt that locked down the distributor was loose and the dist. turned on me, knocking the timing out of whack. I can't seem to hit the right spot. Also, i'm not sure i have the points set correctly. I set them originally at 22 thousandths. Is this correct..? How would i determine TDC and where would the reference "notch" be ? I cannot see anything on the pulley to go by. Also, i had a needle and seat installed in the Tillotson carb that's on it but it seems to flood. I don't think the float is sticking. Any ideas...?

Dan Mitchell
Tupelo, Ms

Follow Ups:

• Re: '52 Moline greenbeanman in Kansas 06:33:22 05/09/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]