Tractor Talk Discussion Board |
Re: Electronic ignition- worth it?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John S-B on May 24, 2005 at 15:59:51 from (152.163.101.7):
In Reply to: Electronic ignition- worth it? posted by John S-B on May 24, 2005 at 04:40:14:
Thanks for the info guys. How hard is it to install the igniter? The old girl is 60 this year so putting in a electronic ignition is about like grandma getting a hearing aide. Unfortunately I am not retired (or even close) so I don't have time to tinker with the M every week. I need to get on and go. It has a rebuilt carb on it and I had new bushings put in the distributor. Its been about 4 years since plugs, cap, and wires so I thought I'd try those first. I also put in some bushings in the gov. linkage to take out some slop. It's got good compression so hopefully this is something simple. I just have'nt had time to get tune up parts and I thought that while I was at it I'd fix it right.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|