Tractor Talk Discussion Board |
Re: Large Kubota tractors
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on June 06, 2005 at 01:58:23 from (216.208.58.150):
In Reply to: Large Kubota tractors posted by Huw from West Wales on June 05, 2005 at 12:23:13:
Huw: I had an opertunity to operate two different Kubota tractors. First one was a 6950, I think around 70 hp. I forget model number on 2nd one 85XX, and I understand it was about 90 hp. Both these tractors were 4x4. I probably put about 600 hours on each of these tractors. I must say I was quite impressed. The manuverability for that size of 4x4 was truly amazing. They both seemed to have the rated hp as advertized, transmissions were convenient to use and had good speed selection. Hydraulics worked well on both. Now that is quite a testimonial from a dyed in wool IH man. I guess what I'm telling you is these tractors from a handling and operation point of view, came as close to the old IH 06, 26 and 56 series, as anything I've operated. Your right not a lot of sophisticated electronic gadgets either. I have also operated both new CaseIH as well as John Deere, neither of which impress me as much as the Kubota. I do know Kubota had problems with sheet metal on the older 6950 models. It seemed to rust under the paint and tractors tended to look quite shabby even at 5-10 years of age. I think this problem has been cured. Would I buy one? Definately, if I were still farming and the price was competive. Mind you competive could be 5% to 10% higher than anything else I've operated new in the past 10 years.
Follow Ups:
Home
| Forums
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|