Tractor Talk Discussion Board |
Re: What is drawbar horse power?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by What HP is!! on June 18, 2005 at 08:24:49 from (207.200.116.199):
In Reply to: What is drawbar horse power? posted by frankiee on June 17, 2005 at 12:15:44:
Horsepower Defined Exactly what is horsepower? Horsepower is defined as the amount of energy or work required to raise a weight of 33,000 pounds a height of one foot in one minute of time or to overcome or create a force which is equivalent to doing that amount of work. Therefore in simplified terms, a horsepower is 33,000 foot pounds of work done in one minute. However, horse power may be required at various power points of the engine and the calculation must be accordingly. For instance, the horse power generated by an engine, as indicated by the power in the cylinders, may not be the actual power which can be utilized for work as there is the friction of the engine to be considered. Then there is "brake" horsepower which is the actual horsepower delivered to the engine shaft and which can be used for work, and the "effective" horsepower, etc. The following definitions should add some clarity: Indicated Horsepower This represents the power developed in the engine cylinder as obtained from the pressure in the cylinders. This is pressure obtained from an indicator which shows cylinder pressures. Indicated horsepower does not represent the actual useful power delivered by the engine. Brake Horsepower This is the actual horse power delivered by the engine to the shaft. It is equal to the "indicated horsepower" less the friction of the engine. It is useful horsepower and is also called the "shaft horsepower". Effective Horsepower This is the final horse power delivered to equipment. An engine may be operating compressors, pumps and auxiliary equipment as part of its own power production needs, and the remaining power is therefore the effective power for drive. The difference between indicated horsepower and effective horsepower may be as much as 25%. From "Tractor & Equipment Service" by J. E. Badley
Follow Ups:
Home
| Forums
Today's Featured Article -
Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|