Re: Re: Power King Parts

Posted by Joe Helfinstine on May 18, 1999 at 05:44:49:

In Reply to: Re: Power King Parts posted by Fred Olsen on May 27, 1998 at 21:37:13:

: Dick: Power King/Economy/Jim Dandy are now owned/built (PK only) by:
: HCC, Inc.
: 1501 First Avenue
: Mendota, IL 61342
: (800) 262-1191
: They may still have parts for the Warner T-25 trans. Part of the problem with these is that you MUST run the lube level one inch below the fill plug, as instructed by PK, or you will wet the clutch when going downhill as these transmissions have no end seals. (When going uphill the oil will dump from the front trans to the rear trans to the rear axle, which is OK for the Dana GT-20 axle as they mounted it upside-down so it doesn't lube right anyway!) Oh well, just another shining example of Engineering Products' wonderful design technique. By the way, if you happen to be running a mower deck with that goofy front PTO, contact me if you wish for a couple of fixes that work well. As a last resort (please) for trans parts, there may be something at dealers around here (SE Wisconsin) as PKs are from here.
: Regards, Fred.

Could you please tell me where I might be able to find mower blades for my PK? The serial number on the dashboard is 59042, sorry but that is all I have as far as information is concerned.

Follow Ups:

Post a Followup