Re: Hydrostatic Power Steering

Posted by Bob on June 25, 2005 at 21:02:26 from (64.21.249.40):

In Reply to: Re: Hydrostatic Power Steering posted by 504 on June 25, 2005 at 19:32:17:

I suspect if you checked out the Deeres you mention, you'd find out it takes slightly less steering wheel rotation to steer "lock-to-lock" in one direction than the other.

The reason the difference is SMALL is that a relatively LARGE steering cylinder is used with with a SMALL piston rod. The combination of the LARGE cylinder and the SMALL rod makes the percentage of difference in displacement from one side of the cylinder to the other less than if a LARGE piston rode were used.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]