Tractor Talk Discussion Board |
Re: soil cement driveways
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RGatt on July 04, 2005 at 07:10:38 from (63.190.192.68):
In Reply to: soil cement driveways posted by BSer on July 02, 2005 at 14:40:36:
I live in North Georgia. My driveway (on a hill) kept washing out in ruts. I had a few bags of portland cement laying around, tilled them into the clay soil, compacted with a tamper, regraveled over. That was three years ago and I haven"t had any problems. On a work project several years ago, we used fly ash (kiln dust) to stabilize soil on a large area. Tilled it in and let it get rained on. Turned hard as concrete in no time. I think that tilling in would be better than just disking it. The better you mix up the particles the better results you get. To do a driveway in an area with no real freeze/thaw issues, I would give it a try. Fly ash is much less expensive than cement, but you will definitely want to mix it well, probably at least down six inches and then compact. The roller might be enough but a vibratory roller would be better. Maybe you"d want to try this whole process on a small portion to see how it will work for you.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|