Tractor Talk Discussion Board |
Re: punctured tire
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe Bloggs on July 04, 2005 at 18:57:06 from (209.247.222.46):
In Reply to: punctured tire posted by rudyrfd on July 04, 2005 at 12:17:05:
you can fix it if you realy have to. first sew up the hole with braded wire that is used for fishing line . or heavy fishing line. then glue a patch on the inside thats twice the size of the cut. then put the tire back on the rim. dont forget to use a tube. now with the tire inflated turn the tire so the cut is uppermost and fill the cut with tire patch glue. this method worhs for side walls as well. I have done it to 6 tires over the years and they all have lasted. one I did the side wall on was on the front tire on my friends big(i dont know what model ) international after I ran over an old plow blade. the cut was about 6 inches long.I sewed it up and glued in a patch and put in a tube and he still has it like that now. its been 4 years.admittedly it sat in the paddock for 3 of those years because the engine stopped working. but he has it going again and the tire is still doing its job.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|