Tractor Talk Discussion Board |
Re: 92 GMC Fails Emmissions
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RB/CT on July 06, 2005 at 07:54:27 from (24.2.166.68):
In Reply to: 92 GMC Fails Emmissions posted by Farmer Paul in Ontario on July 06, 2005 at 05:57:01:
Just two tips from much info on this subject. One: Change your engine oil, just before the test, then if oil passes the rings its clean oil notdirty. Two: Do not keep your gas tank full during the test vapors may bypass if full and reburn, screwing it up. Thankfully you do not live in CT. 96 and up they check the codes with a computer, any service engine light on fails you. (an example, someone I know had a bad transmission and a service engine soon light on, 3K later a new transmission just to pass) Prior to 96, you go on the rollers. Now if you reset the light, and erase the codes, you get an alternate test, which is the rollers. After Nov 1, there is no alternate test in this condition and you fail The threshold for repairs and getting a waiver is $660 spent which gets you a two year waiver. Good luck. I know others who completely removed the air cleaner, but this doesnt probably work.
Follow Ups:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|