|
Tractor Talk Discussion Board |
OT- 1994 Dodge pickup 5th gear problems..
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by mike in New Mexico on July 06, 2005 at 20:57:50 from (64.185.63.234):
Hello, I need help. I lost fifth gear in my Dodge 94 Ram pickup. I discovered the problem today when I tried to fix my speed sensor. Apparently, the nut that holds the 5th gear on the main shaft has come loose. The transmission is a NV 4500. I have been reading all day about how to fix this and I am confident that I can fix the problem if only I can find a unique tool. I need the special socket that fits over a round nut with 4 grooves and I need to torque it to 300lbs. I know I need to replace the nut but the main shaft appears to be undamaged as the gear is still a press fit. Can anybody direct me to where I can possibly buy this special socket? According to the drawing of this tool I found off the internet, it is a tear-drop shaped, stamped socket in which I can put a torque bar on the small end. As I live rurally, I have called every transmission shop within a hundred mile radius and they all want around $700 to fix this problem. I believe I can fix this myself. Does anybody know of a website or a tool company that makes tools like that? Any reply would be greatly appreciated.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
