Tractor Talk Discussion Board |
Re: OT 86 ford F-150
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on July 15, 2005 at 21:45:13 from (64.21.249.40):
In Reply to: OT 86 ford F-150 posted by 504 on July 15, 2005 at 20:05:01:
PROBABLY, each tank has it's own low-pressure fuel pump, only one of which runs at a time, depending upon which tank is selected. These low pressure pumps feed the high pressure pump in the frame rail. If this is the system you have, there will be a weird cannister thing, also in the frame rail. This unit contains a diaphragm, which is acted upon by whichever tank pump is running. When the diaphragm is pushed one way or the other, it moves a valve, which switches the return fuel to the same tank it came from. It can be a troublesome system. One or more of the pumps may have failed, as well as the cannister thing with the valve in it. Also, I have seen the wiring melt off of the pumps, or where it passes though the sender/fuel pump unit, to the outside. The relay should be on top of the driver's side front fenderwell, or in that general area.
Follow Ups:
Home
| Forums
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|